U33 Process Green, Urethane Striping Enamel

House of Kolor — pinstriping paint — U33 Process Green

Urethane Striping and Lettering Enamel

Processing guidelines:

The pinstriping paint can be used for liner, inscription and airbrush work. Contains high pigmentation, low solids and has a long open time.

Processing with subsequent clearcoat sealing:

The paint can be applied with a brush, pinstriping tool or airbrush. It is ready to use in a pinstriping tool. For brush or airbrush application, it can be thinned with U-00 Reducer (approximately 1:1). Allow a flash-off time of approximately 1-4 hours before applying clear coat.

Processing without clearcoat sealing.

The pinstriping paint must be mixed with KU-200 Catalyst hardener at a ratio of 8:1 (8 parts paint to 1 part hardener). Preferably apply it with a brush or pinstriping tool. It cures to a weather-resistant finish and does not need a clear coat.

Colour: U33 Process Green

Contents: 118ml container

Below is a colour chart and an example of the finished paintwork.>

Download the application instructions below.

Download

• HOK-Linierfarbe (PDF), 117 KB